| |
| |
 |
 |
|
|
Isıtıcılar |
.jpg)
|
| Read more about the
benefits of these standard induction heaters.
Underneath all models are
depicted. |
| |
WHY USE INDUCTION HEATING?
Induction
heating is a superior, fast and controlled
heating method. It is a safe and environmentally
friendly alternative for traditional heating
methods such as ovens, oil baths or blow
torches. These methods cause smoke, fumes or oil
waste and are hazardous for personal health and
safety.
FOR BEARINGS AND OTHER
COMPONENTS
Bega induction heaters are
versatile and can also be used for heating of
gear wheels, bushes, couplings etc. It is common
knowledge that a correct mounting method extends
bearing life.
Controlled induction heating
prevents unnecessary damage, and retains
original pre-lubrication. Induction heaters are
ideal for sealed bearings
(2RS-ZZ).
SAFE AND CONTROLLED HEATING
· Digital electronics provide optimal
control during the heating process and
automatically select the most efficient power
supply to ensure a balanced and fast
heating.
· No extra steps are necessary.
· Explosive heating is impossible (no
discoloration or pitting of material).
· 3 years warranty! The
electronic unit is supplied with a 3 year
warranty.
·
DEPENDABLE
QUALITY
Our
induction heaters are proved dependable.
The
electronics can handle continuous use in
production due to the excellent cooling
lamellae.
The robust and easy-to-use design
offers you the security of a reliable heater
that is suitable for continuous operation in an
industrial environment.
ADVANTAGES OF BEGA
INDUCTION HEATERS
· Robust design for working in
industrial environment
· Microprocessor controlled
electronics prevent over-heating and explosive
heating
· · of component
· · unique easy-to-use swivel
arm
· maintenance free
· suitable for continuous
working
· automatic demagnetisation
· automatic power reduction
· large standard range
· meets CE and IEC requirements
· · · ·
SERVICE
Our manuals
show clear instructions. If you have any
questions about your induction heater simply
contact our service department. You will get
expert advice from skilled
specialists.
|
|
.jpg) |
Betex 22 ELD
portable, 3.6 kVA
Portable
induction heater, min. bore 15
mm! |
| |
Betex 22 ELD portable 3.6
kVA
Portable heater in handy carrying
case.
Ideal for service engineers to use on
site.
Standard incl. 4 yokes, diameter 10,
14, 20, 40 mm.
min. en max. sizes
of components to be heated:
min.
bore: 15 mm
max. OD: 210 mm
max. width:
120 mm
max. weight of bearing to be heated:
15 kg
max. weight of other components: 10
kg
Technical
specifications:
|
|
.jpg) |
NEW! BETEX 24 RLD
TURBO portable, 3.6 kVA
New
generation TURBO heaters with low facility power
and high output. For components min. bore 10 mm
to 40 kg. |
| |
NEW! Betex 24 RLD
TURBO portable, 3.6 kVA
New Generation, extra powerfull
heaters.
Low
facility power, high output.
With supports
for heating in horizontal position;
Includes
5 yokes: diameter 7, 10, 14, 20, 40 mm.
Min.
bore 10 mm!
Heats parts upto 40
kg!
Ideal for service engineers on
site.
min. / max. sizes of
components to be
heated:
min. bore: 10
mm
max. OD: 350 mm
max. width: 130 mm
max. weight of bearing to be heated: 40
kg
max. weight of other components: 25 kg
|
|
.jpg) |
NEW! Betex 24
RD TURBO, 3.6 kVA
New generation
TURBO heaters with low facility power and high
output. For parts min. bore 15 mm upto 95
kg! |
| |
NEW! Betex 24 RD
TURBO, 3.6 kVA
New
Generation, extra powerfull
heaters.
Low
facility power, high output.
With supports
for heating in horizontal position;
Choice
of 7 yokes: diameter 10, 14, 20, 30, 40, 50, 60
mm.
Min. bore 15 mm!
Heats parts upto 95
kg!
Basic benchtop model with loose
yokes
min. / max. sizes of
components to be
heated:
min. bore: 15
mm
max. OD: 520/750 mm
max. width: 230 mm
max. weight of bearing to be heated: 95
kg
max. weight of other components: 50 kg |
|
.jpg) |
NEW! Betex 24
RSD TURBO, 3.6 kVA
New
generation TURBO heatersr with low facility
power and high output. For parts min. bore 15 mm
upto 95 kg! |
| |
NEW! Betex
24 RSD TURBO, 3.6 kVA
New Generation, extra powerfull
heaters.
Low
facility power, high output.
With supports
for heating in horizontal position;
Choice
of 7 yokes: diameter 10, 14, 20, 30, 40, 50, 60
mm.
Min. bore 15 mm!
Heats parts upto 95
kg!
Basic benchtop model with ergonomic
swivel arm
min. / max. sizes of
components to be
heated:
min. bore: 15
mm
max. OD: 520/750 mm
max. width: 230 mm
max. weight of bearing to be heated: 95
kg
max. weight of other components: 50 kg
|
|
.jpg) |
NEW! Betex 40 RMD
TURBO, 12 kVA
New generation
heater with low facility power |
| |
NEW! Betex 40 RMD
TURBO, 12 kVA
Features: mobile, powerful
heater with ergonomic swing arm for parts upto
approx. 550 kg. Practical pivoting operation
panel and sliding supports allow easy operation.
The Betex 40 RMD turbo is very suitable for
continuous use. Smallest bore size is 60mm.
Heats components in horizontal or vertical
position. 400, 450 of 500 Volt. Choice out of 3
yokes (swivel): diameter 40, 60, 80 mm.
When
time is ultimate, this heater heats very fast in
comparison with other standard heaters.
Ideally suited for machine builders
(gear wheels) and for transport sector
min.
en max. sizes of components to be
heated:
min. bore: 60 mm
max.
OD: 920 mm
max. width: 350 mm
max. weight
of bearing to be heated: 550 kg
max. weight
of other components: 450 kg
Other sizes OD,
width or hight on
request.
Heating
examples:
Bearing no. 23156, 95,8
kg
OD: 460
ID: 280
Temp.: 110°C
Time: 3.30 min
Bearing no.
23172, 220 kg
OD: 600
ID:
360
Temp.: 110°C
Time: 8.40
min
Gear wheel, 300 kg
OD:
600
ID: 210
Temp.: 110°C
Time:
3.05
min
|
|
.jpg) |
Betex 22 ED, 3.6
kVA
Basic bench top model for
bearings to ± 35 kg |
| |
Betex 22 ED 3.6
kVA
Basic bench-top type with choice
of 7 yokes. Suitable for continuous use. For
bearings upto ± 35 kg.
Heats components in
horizontal or vertical position.
Choice of 2
sets yokes, diameters: 10, 14, 20, 30, 40, 50,
60 mm.
min. en max. sizes of
components to be
heated:
min. bore: 15
mm
max. OD: 340 mm
max. width: 150 mm
max. OD with extension yokes: 480 mm
max.
width/hight with extension yokes: 260 mm
max.
weight of bearing to be heated: 35 kg
max.
weight of other components: 20
kg
Technical
specifications:
|
|
.jpg) |
Betex 22 ESD, 3.6
kVA
Basic bench top model with
swivel arm for ergonomic working, for bearings
up to ± 35 kg |
| |
Betex 22 ESD 3.6
kVA
Basic bench-top type with unique
swivel arm. Suitable for continuous use. For
bearings upto ± 35 kg.
Heats components in
horizontal or vertical position.
Choice of 2
sets yokes, diameters: 10, 14, 20, 30, 40, 50,
60 mm.
min. en max. sizes
of components to be
heated:
min. bore: 15
mm
max. OD: 340 mm
max. width: 150 mm
max. OD with extension yokes: 480 mm
max.
width/hight with extension yokes: 260 mm
max.
weight of bearing to be heated: 35 kg
max.
weight of other components: 20
kg
Technical
specifications:
|
|
.jpg) |
Betex 38 ESD, 8
kVA
Bench top model with swivel
arm for bearings upto ± 125 kg |
| |
Betex 38 ESD 8
kVA
Bench top type with unique swivel
arm. For bearings up to ± 125 kg.
Heats in
horizontal or vertical position.
400, 450 of
500 Volt
Choice out of 5 yokes (swivel):
diameter 20, 30 ,40, 50, 70 mm
min.
en max. sizes of components to be
heated:
min. bore: 30
mm
max. OD: 480 mm
max. width: 200 mm
max. OD with extension yokes: 720 mm
max.
width/hight with extension yokes: 330 mm
max.
weight of bearing to be heated: 125 kg
max.
weight of other components: 75
kg
Technical
specifications:
|
|
.jpg) |
Betex 38 ZFD, 12
kVA
Powerful roll-around heater
with swivel arm for bearings upto ± 250
kg |
| |
Betex 38 ZFD, 12
kVA
Mobile, powerful heater with
swivel arm for bearings upto ± 250 kg. With
handy rotating operating panel. Heats in
horizontal or vertical position. 400, 450 or 500
Volt.
Choice out of 5 yokes (swivel):
diameter 20, 30, 40, 60, 80 mm
min.
/ max. sizes of components to be
heated:
min. bore: 30
mm
max. OD: 700 mm
max. width: 265 mm
max. OD with extension yokes: 1020
mm
max. width/hight with extension yokes: 460
mm
max. weight of bearing to be heated: 250
kg
max. weight of other components: 150 kg
Technical
specifications:
|
|
.jpg) |
Betex 38 ZFD, 24
kVA
Powerful roll-around heater
with swivel arm for bearings upto ± 350
kg |
| |
Betex 38 ZFD, 24
kVA
Mobile, heavy
duty heater with unique swivel arm for
components up to ± 350 kg. Includes practical
rotating operating panel. Heats parts in
horizontal or vertical position.
400, 450 or
500 Volt.
Choice out of 5 (swivel) yokes:
diameter 20, 30, 40, 60, 80 mm
min.
/ max. sizes of components to be
heated:
min. bore: 30
mm
max. OD: 700 mm
max. width: 265 mm
max. OD with extension yokes: 1020
mm
max. width/hight with extension yokes: 460
mm
max. weight of bearing to be heated: 250
kg
max. weight of other components: 150 kg
|
|
.jpg) |
Betex SUPER, 24
kVA
Powerfull heater for heavy
duty, for bearings upto ± 600
kg. |
| |
Betex SUPER 24
kVA
Powerful heater for exceptionally
heavy components upto ± 600 kg. Heats components
in horizontal or vertical position. 400, 450 of
500 Volt. Choice out of 3 yokes: diameter 60,
80, 100 mm.
Ideally suited for
workshops in the heavy industry, railways,
repair shops, paper mills etc.
min. en max. sizes of
components to be heated:
min.
bore: 60 mm
max. OD: 900 mm
max. width:
400 mm
max. weight of bearing to be heated:
600 kg
max. weight of other components: 350
kg
Other sizes OD, width or hight on
request.
|
|
.jpg) |
Betex GIANT, 40
kVA
Powerful heater for heavy
duty, for bearings upto ± 1250
kg. |
| |
Betex GIANT 40
kVA
Powerful heater for heavy duty, for
bearings upto ± 1250 kg. Heats components in
horizontal or vertical position. 400, 450 of 500
Volt. Choice out of 4 yokes (swivel): diameter
60, 80, 100, 150 mm.
Ideally suited for
work shops in the heavy industry, railways,
repair shops, paper mills etc.
min. en max. sizes of
components to be heated:
min. bore:
85 mm
max. OD: 1400 mm
max. width: 450 mm
max. weight of bearing to be heated: 1250 kg
max. weight of other components: 750
kg
Other sizes OD, width or hight on
request.
|
|
 |
Betex GIGANT L,
XL, XXL, 95 kVA
Powerful
induction heaters for exceptional heavy duty
upto ± 11.000 kg |
| |
Betex GIGANT XL,
GIGANT XXL, upto 95 kVA
These are the
champions amoung the heaters! Designed for
exceptionally heavy duty.
This induction heater, a GIANT XL,
95 kVA, can heat components of ± 11.000 kg!
Heats components in horizontal or vertical
position.
These heaters are popular in
work shops in the heavy industry, for example:
- steel
- railway
-
paper
- gear wheel
manufacturers
min. en max. sizes of
components to be
heated:
min. bore: 145
mm
max. OD: 2500 mm
max. width: 700 mm
max. weight of bearing to be heated: on
request
max. weight of other components: on
request
Other sizes OD, width or hight on
request
|
|
|
|
|
|
